30x30 mount ESC’s still get all the best tech first and are slightly more cost effective with that tech. The F3 processor on these ESC’s tend to do a better job managing things and may result in a performance improvement depending on what you’re using now. They also tend to have a slightly better reliability track record than anything smaller. They do weigh a gram or two more but few people tend to care and prefer the reliability and smoother performance. For this reason, we’re offering this ESC which tests as one of the best ESC’s around so far. It’s been performing well for us and we’ve tried it at 96k but have had better luck with tuning on 24k and 48k for now. If you don’t know what that means, don’t worry about it, you don’t need to know. This will fit in the Glide, CineGlide, CineGlide 7” and the upcoming un-named frame. Let us know if you have a good dental-like name for a freestyle frame btw.
The metal fet version is supposed to have an extra leg up in reliability. Both are recommended for 5-8” operation with the metal FET version being a better choice at 8”.
Specifications:
- 32bit ESC with BLHELI32 firmware
- Supports 3-6S lipo input
- PWM input, TLM supported
- Voltage output (VBAT)
- NO BEC
- Supports oneshot / Multishot / Dshot PWM
- Mounting holes 30.5x30.5mm
- Supports damped light
- F3 MCU, runs double faster than F051
- Extra Cap needed for high current or 6s usage
- Dimensions: 44x37x6mm
- Weight: 13-14g
Downloads:
Customer Reviews
I picked this up for a 7" Floss build that I hope to use for mountain cruising and moderate freestyle/racing. I had to repin the harness for the Foxeer F7 FC but that's simple enough. The build is flying decent with the "30mm" motors, RPM filtering, and minimal filters turned on, according to blackbox logs it's one of my lowest-noise builds yet. I've been monitoring amperage on hard maneuvers and I don't expect to ever even get close to the 65A rating with a sub-kilogram quad, but it's nice to not have to think about it. The board itself is impressive - the quality looks good to me, and the battery pads are nice and big with thru-holes. I'm sorta surprised they recommend using a cap for 6S, but it's easy enough and I've had zero issues on 6S with the cap. Thanks for stocking such a robust component!
Still haven’t received my order after 18 days! I know this isn’t FPVCycle’s fault, but this is rediculous!