FPVCycle 16mm Motor - 4100Kv

  • Sale
  • Regular price $17.99


This motor is unique in a few ways. First off, it’s sporting our new lighter prop shaft design, it’s got a 9x9 M2 mount so it will fit lighter style frames and the overall stator volume is higher than 1605 while weighing much less than it should. This motor is ideal for high powered 3” operation and low weight 4” crafts.

The goal of this motor is maximum power and control for a medium weight 3" quad. A taller stator with taller magnets are used for the high RPM control needed for small 3" props but a wide 16mm diameter with middling 4100kv is used to manage the heat dissipation of the motor in use. This is one of the most genuinely unique and interesting motors we've got in our lineup.

This motor is very powerful and 'notchy'. Please be sure to use a properly applied and appropriately sized capacitor.

Recommended Uses:

  • 3” 3S-4S high powered craft with AUW >150g
  • 4” 3S with very low load props and under ~250g AUW

Specifications:

  • 16mm stator diameter, greater than 5mm stator height
  • 9x9mm M2 mounting pattern (not flush mount)
  • ~13g with ~70mm length wires
  • ~16g with prop adapter, nut and 240mm 24awg wire length
  • 0.15mm Kawasaki High performance laminations
  • N52SH ARC magnets
  • 3mm grade 5 titanium internal shaft
  • M3 grade 5 titanium prop shaft with M5 adapter
  • 2x5x2.5mm 520zz Japan ISC Custom bearings
  • 7075-T6 aluminum casing
  • 260℃ enamel coated single wrap oxygen-free copper windings

Customer Reviews

Based on 19 reviews
100%
(19)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
John B (Ellicott City, US)
Great 3.5" motor

I got a set of these to put on a Botgrinder/Ummagawd Grinderino when they updated the arms to accept the 9mm mount. I think this is the right amount of motor for a slightly "heavy" 3.5" build - a lighter (sub-250g) build can get by with less, but the Grinderino is a chonkier frame and benefits from a little more power. The blurb says these are notchy motors, and they are if you just spin them by hand but I haven't noticed any detrimental effects on the tune. Here again, a stiffer/heavier frame helps. Anyway, these are good for a build about that size.

B
Brian Sneeringer (Maputo, MZ)
run well and good looking

real strong low in the throttle, I am using them for a heavy 3.5 build

J
Jeffery Iannacco (Oklahoma City, US)
16mm 4100kv..Motors

Great motors plenty of power...

S
Scott Givens (Fontana, US)
Perfect Motor For My Soon To Be Release Prototype 3.5" 5mm Arms on 5s - Motor Output set to 82%

Perfect Motor For My Soon To Be Release Prototype 3.5" 5mm Arms Frame. These motors tune quite nicely and with my current setup, I surprisingly can run this quad with nearly every battery possible from 3000mah 3s Lipo for 16minutes of cursing, to even 1100mah 4s lips for freestyle. My favorite is the Pyrodrone 700mah 5s Lipo with motor output set to 82% percent. I run these motors on a 3.5" prop with 4s and 5s. These motors have taken a beating along with the New Prototype 3.5" Frame. Thank you Bob...It's performing excellent!

I wish these motors would go on sale

K
KEITH MCCORMICK (Atlanta, US)
MY NEW FAVORITE QUAD

MY FAVORITE QUAD FOR A LONG TIME NOW HAS BEEN THE TP3 BUT I HAVE A NEW FAVORITE . WOW WHAT PERFORMANCE IT HAS .
WITH BATTERY 234 GRAMS .
DRAGON FROG FRAME
HGLRC Zeus35 AIO - F4 FC + 35A BLS 3-6S 4-in-1 ESC
Caddx Polar Micro Digital FPV Vista
FPVCYCLE 16MM MOTOR - 4100KV
15cm Replacement Antenna Spare Part for Caddx Vista DJI
COUPLE THINGIVERSE FILES
Tattu R-Line 650mAh 4S1P 14.8V