FPVCycle 13mm 5000kv, 6350kv Motor - 2mm prop shaft

  • Sale
  • Regular price $14.98


TUNING TIPS:
If being used on a TP3 frame or other skinny arm frame, consider reducing ramp up/start up power by a notch or two from default.  Strongly recommend turning on the D notch filter in any flight code you're running.  Consider reducing PID's a bit from default and increasing TPA.  The cross braces for the TP3 arms will allow you to reduce filters and achieve higher tuned control performance if you're searching for it.
This video may be helpful: 

Recommended uses:


Extended use cases:

  • 3" with 4S is fine but tuning will be a PITA.  See tuning tips.
  • 4" (4023 twin blade) with 2S or 3S is okay but again, difficult to tune.

Checkout the TP3 blog for more details


HEADS UP!
Please be careful tightening mounting screws.  These motors are tiny.  You can strip the screw channel if you over tighten them.  Consider some locktite if you're worried.

Specifications:

  • ~6.0g with long, ~85mm wires
  • Mounting: 9mm diameter, 4 hole, M2
  • 27awg silicone motor wire
  • 2mm press fit prop shaft that’s 5mm tall
  • 2mm internal shaft all the way through
  • T-mount prop mounting also
  • 5mm size bearings
  • C-clip bell bottom and no C-clip n top
  • 0.15mm laminations
  • 7075 aluminum
  • Single piece bell design

Included:

  • 1x motor
  • 2x 8mm screws for T mount props
  • 4x 5mm screws

Recommended use:

  • Low load 3” prop: Gemfan 3016 highly recommended
  • Recommended all up weight (including 3S battery): 88-109g
  • The same 3S setup works fantastic with 2S 450mah batteries too

3S 3” Drivetrain:


Customer Reviews

Based on 96 reviews
94%
(90)
1%
(1)
2%
(2)
2%
(2)
1%
(1)
C
Chris Miller (Indianapolis, US)
FPV cycle 13mm 5000kv

Smooth and very high quality motors. I wouldn’t expect anything less from Bob.

Judge.me YouTube video placeholder
E
Eric (New Rochelle, US)
Smooth

Took a little tuning to dial them in, but once I got it, these little suckers started to sing. They're also very pretty looking on my tp3 build. Thanks, Bob, for all you do for the hobby. And don't forget to floss!

O
Odd Arild Waagsaas (Drobak, NO)
Excellent for my 3inch bi blade vista

I have three kwads with this motor now, so far no issues & they pack performance… not to mention they look sweet. Great product, highly recommended

M
Marko van den Helm (Nuland, NL)

Perfect match for the TP3 frame

L
Larry White

I like it little different from old ones